12-ft LED Flexible and Cuttable Plug-in Tape Light - Warm White

Under cabinet lighting is an essential in most kitchens because it provides many different sources of light. It is a form of task lighting for preparing food, entertaining and other activities in the kitchen. You can also leave them on at night for safety as well. We focus on producing long-lasting, smooth LED lighting output you don’t have to worry about seeing the dots from the diodes on your countertop as well as producing a slim design to keep the fixture hidden under the cabinetry.
Specification
Related Model AC1067-WHG-12LF0-G,B01LZNR71D,525760,HBWL1002
Rooms Bathroom, Bedroom, Dining Room, Home Office, Kitchen, Laundry Room, Living Room, Utility Room
Fixture Material Silicone
Fixture Color White
Glass/Lens Type Clear
Two Level Lighting No
Two Detection Zone No
Safety Rated Damp Location
Safety Listing ETL
Energy Star No
Light Included Yes
Light Source LED
LED Qty 216
Color Temperature 3033K
Color Rendering Index (CRI) 77.8
Rated LED Life 30000 Hrs
Lumens 1600
Specification
Dimming No
Input Voltage 120V 60Hz
Battery Included No
Command Strips® from 3M No
Power Cord 5-Ft 2-Prong Polarized Plug
Linkable Yes
Connector Cord 3 pc block connector, 3pc 4-inch linking cord
Power Switch In-Line On/Off Switch
Power Source Plug In
Warranty 6-Year Limited Warranty
Fixture Size 12 ft
Fixture Dimensions (inches) 144 x 0.39 x 0.12
Fixture Weight (lbs) 0.59
Write Your Own Review
You're reviewing:12-ft LED Flexible and Cuttable Plug-in Tape Light - Warm White
Your Rating
Customer Questions
The lights flicker after 5 minutes. What can I do to improve the connectivity?

We recommend disconnecting and reconnecting everything, as well as unplugging the power source. If you are still experiencing issues, please reach out to customer service at 1-800-291-8838 for troubleshooting assistance. We are available Monday through...

Hi, do you have connectors that are longer than the ones in the kit, maybe the length of a microwave for your adhesive tape led lights?? I am hoping to skip over my microwave to connect my to cabinets together with one strip. (Does that make sense?) Thank you.

We are so sorry to disappoint you, but unfortunately, the only accessories available are what comes in the kit. We do not manufacture longer connectors.

The white LEDs only work on the remote for the beginning of the strip up until it was cut and added to the corner connector so only brightness works in a small spot, is there something that can fix that?

We recommended disconnecting and reconnecting everything as well as unplugging the power source. This is similar to a reset or reboot. If you are still experiencing this issue, reach out to customer service at 1-800-291-8838 for further assistance. We...

I just need a 12 ft. reel of the warm white to connect to what i already have. I do not need the plug/switch. Do you just sell the reel?

Unfortunately, you cannot connect multiple kits together. You can only cut and reconnect from the same strip. 

I need one more corner connector? Is it possible to get one?

Please reach out to customer service at 1-800-291-8838 ext. 230 to inquire about additional parts.

can additional power supplies be purchased?

We are so sorry to disappoint you, but unfortunately, the powe supply is not available to purchase seperately.

NO You are missing the boat by not selling additional individual parts. I like most kitchens the cabinets are broken up by sinks and stoves where lighting needs to be fed from multiple locations. Will seperate parts be available in the future (next six months?)

It is something we are looking into, but will not be available in the near future.

Can you use same remote to control 4 separate strip led lights?

As long as it is the same model, 1 remote will control multiple sets.

I have 2 kits of adhesive light kits. I works fine but the other having problems. The one only blinks. I can't get blinking to stop. It started out all red. I checks all the connections, unplugged and plugged. I push the 100% and nothing else works. I'm using same remote. 1st one word The top on and off button and the second one turns on and off on bottom part off remote. That's the one I'm having problems with. What. An i do to stop the constant blinking like the other.

Do you have both kits connected to eachother? If so, that is most likely why you are experiencing an issue. You cannot connect two kits together. It overloads the power source and causes the lights to malfunction.  If this is not the case, reach...

Can I add a 6 or 12 foot “extension” to an 8 foot dimmable kits?

You cannot add on to the tape. You will overload the power source. It is only capable of handling the 8 feet. You can only cut and connect from the same strip.

Did you find what you were looking for?