Good Earth Lighting 24-ft High-Lumen Color Changing LED Tape Light

Description

The 24-foot high lumen self-adhesive LED tape light comes with a color-changing remote that allows for 4 different effects and 12 preset hues to create the perfect mood lighting ambience for entertaining or use for daily under cabinet accent lighting.

This LED super high lumen tape light with color-changing technology can be used for under cabinets, ambient accent lighting in bedrooms, toe kicks or crown moldings on cabinetry, or any other room you need decorative lighting or full illumination
Multifunction remote control to program four different lighting effects and patterns (flashing, fade, quick, slow) as well two different lighting settings to control the color temperature to brighten/dim and power on/off
Cuttable and rejoinable with connectors to customize lighting areas to fit your needs
Premium 3M peel and stick adhesive backing that can be mounted directly to most surfaces; screw mount and clips provided as well
Long-lasting, energy-efficient LEDs provide a smooth light output of 3500 lumens and an expected lamp life of 30,000 hours
Use the included two 12-foot tape lights to link up a maximum total of 24 feet
For indoor use only; not for use with dimmers or extension cords or over sinks/areas with water
Peace of mind with 6-year limited manufacturer warranty

More Information

Specification
Related Model	AC1214-WHG-24LF1-G, 1238180, B0973K45FS
Fixture Material	Polyurethane
Fixture Color	White
Glass/Lens Type	Clear
Mounting	3M Tape
Safety Rated	Damp Location
Safety Listing	ETL
Light Included	Yes
Light Source	LED
LED Qty	432
Color-Changing Temperature	Yes
Color Rendering Index (CRI)	88.2
Rated LED Life	30,000 hours
Lumens	3500
Dimmable	Yes
Dimming Type	IR Remote Control
Input Voltage	DC24V
Input Wattage	49

Specification
Battery Included	No
Command Strips® from 3M	No
Power Cord	5-ft power supply driver with plug
Linkable	Yes
Connector Cord	(2) block connectors, (4) 8-inch linking cords
Power Switch	IR Remote
Power Source	Plug In
Warranty	6-Year Limited Warranty
Fixture Size	24 ft
Fixture Dimensions (inches)	288 x 0.4 x 0.1
Fixture Weight (lbs)	0.58
Includes Remote	Yes

Reviews 1

Questions & Answers (30)

Customer Questions

What's the maximum length you can run tape lighting?

This tape light is NOT expandable beyond 24 ft. Additional LED tape light lengths CANNOT be added. Only the provided (2) 12 ft tape light in this kit can be linked together.

Where can I buy the connectors separately without the entire kit?

Unfortunately, the accessories for our tape light kits are not sold separately.

Can they be made or programmed to turn on and off with a light switch only?

If you have the lights power source plugged into an outlet controlled by a switch, you can turn the lights on and off by the switch. However, if you selected a color other than the defualt with the remote, this will revert the lights back to the default.

Looking for the corner connectors for your 24-ft tape lights

We are so sorry to disappoint you, but unfortunately, accessories are not sold separately for our tape light kits.

How do I hardwire the lights without a connector?

This fixture is not intended to be hardwired.

How do I hardwire these without a connector?

This fixture is not intended to be hardwired.

Can I get some additional corner connectors and a longer corner connector?

We are so sorry to disappoint you, but the accessories for out tape light kits are not sold separately.

Can you link two kits together to work with one remote?

You can use one remote for two sets, but you cannot connect two sets of tape light from different kits together. You can only cut a reconnect from the same kit.

Can I purchase some more corner connectors or a longer connector? I didn't see any at the retailer I purchased the package I bought.

We are so sorry to disappoint you, but the accessories for our tape light kits are not sold separately.

Will AC1214-whg-24lf1-g work with Alexa?

We have not tested this set with Alexa. We do have a new product that is WiFi enabled and compatible with Google Assistant and Amazon Alexa, Model #AC1275-RWF-24LFW-G.

Is there a way to set the remote so that the setting I like them on will come on every time without having to dim and set color each time?

As long as you use the remote to turn the lights on and off and not the wall switch, the settings should not default.

I unplugged the lights with only 1 section hooked up and now they are blinking.

Please try disconnecting and reconnecting everything to see if that fixes the issue. If not, please reach out to customer service at 1-800-291-8838 for further assistance. We are available Monday through Friday 8:30 am to 5:00 pm CST.

If I have two packages installed in one room, will the two remote controllers work independently of each other?

Yes. The remotes are not programmed to the fixture, but are line of sight. You can use either remote for both sets of lights.

How close does the remote need to be to work?

The maximum operating distance of the remote control with new batteries is approximately 20 ft. (7 m) with a direct line of sight between the remote control and the IR receiver.

What is the default light color?

Default should be 4000K.

Can I buy an extra roll of lights for this model?

We are so sorry to disappoint you, but you cannot connect tape light from another kit. You can only cut and connect from the same kit.

Can corner connectors be connected in series to make for a longer distance between tape lights?

You cannot connect corner connectors together to make a longer extension.

Can corner connectors be connected in series to provide for more distance between tape light runs?

You cannot connect corner connectors together to make a longer extension.

Can I purchase a replacement remote control?

Please reach out to customer service at 1-800-291-8838 to inquire about additional parts.

Can I buy a replacement power connector block separately?

We are so sorry to disappoint you, but unfortunately, the parts for our tape light kits are not sold separately.

I installed this tape light kit in a second home 6 weeks ago. They worked fine for a week. I just returned and they won’t turn on. I changed the battery (2025) and the lights are still off. Power is direct wired through an outlet that has power. I am inches from the IR receiver antenna. Nothing works. I have checked all the connections. It seems to be either the power supply unit or the remote.

We do not recommend hardwiring our tape light kits. Doing so also voids warranty.

Can I get a new power supply and infrared controller plus controller for this model?

The parts/accessories for our tapelight kits are not currently sold separately.

Can I connect the power supply in the middle of 2 strips? The plug I need to use is in the middle of the area I want to run my lights.

The power supply does not connect directly to the stip. It is connected to the IR receiver/controller, and the IR receiver/controller is connected to the power supply.

Can two 12-ft tape sets be purchased separate from kit?

The strips and parts/accessories for our tape light kits are not sold separately.

The directions were missing in the package I bought at Lowe's for this unit so I don't know how to cut or use the splicers. I could not find it on your website. Please advise.

The instructions can be accessed under "Downloads" on the product page of the website.

I have a cabinet to the left of my stove to the right of my stove and 2 connected cabinets to the right of my sink. How can I link these together? I bought a 24-ft kit, 3500 lumens, thinking that I would be able to make one kit work in all 3 locations. Do you sell anything to double or triple the factory connections? Also do I need to stick with 3500 lumens if I have to buy another kit to work in conjunction with the first kit. Will 2 or 3 separate kits work with the same remote?

Unfortunately, the only accessories available for the tape light kits are what comes include in the kit. We do not have any longer extensions. If you have to jump large spaces, we recommend seperate kits with seperate power sources. You cannot connect multiple kits together or use parts/acccessories from other kits. You can however use the same remote as long as it is the same model#/same remote.

I've had these lights installed for about a month and now all of a sudden they're blinking. Why are they blinking?

Please reach out to customer service at 1-800-291-8838 for assistance. We are available Monday through Friday 8:30 am to 5:00 pm CST. More information is needed on your application.

Help with installation

Please reach out to customer service at 1-800-291-8838 for assistance with installation. We are available Monday through Friday 8:30 am to 5:00 pm CST.

Need a remote control.

For parts replacement, please reach out to customer service at 1-800-291-8838. We are available Monday through Friday 8:30 am to 5:00 pm CST.

If you use a timer will the light come on with the same setting as when it went off?

As long as it is not turned off at the light switch, it should turn to whatever color you have selected on the remote.

Did you find what you were looking for?

Your question:

I agree to the Privacy Policy

Your name:

get notification on email when the answer is ready

Your e-mail:

Downloads

24-ft. Selectable White High-Lumen LED Strip Light

Where to Buy