180-Degree 2-Head 1400 Lumen LED Motion-Activated Flood Light with Timer - Bronze

This Good Earth Lighting 2-head hardwired motion-activated security light provides safety and security by illuminating dark areas such as backyards and driveways. The sturdy polycarbonate housing with a shatter-resistant diamond-patterned diffuser lens provides a smooth and even light distribution. The Set to Go feature sets the light with a 3-minute timer and 50-ft distance out of the box, no testing required. IP65-rated and cold weather rated, this light is ideal for outdoor wet locations and can withstand cold temperatures. The built-in timer and distance control settings can be customized to meet a variety of lighting customizations. Maximize energy savings and discourage intruders from coming near the home. This light has a 6-year limited warranty.

Related Model SE1296-BP2-02LF1-G, 3761803
Fixture Material Plastic
Fixture Color Satin Aged Bronze
Glass/Lens Type Diamond Pattern
Mounting Wall/Eave/Surface/Recessed Mount
Motion Detection Range 180 degrees up to 70 ft
Two Level Lighting No
Two Detection Zone No
Light Coverage 39.3 ft to 45.9 ft
Safety Rated Wet Location
Safety Listing ETL
Light Included Yes
Light Source LED
LED Qty 28
Color Temperature 5000K
Color-Changing Temperature No
Color Rendering Index (CRI) 80
Rated LED Life 50,000 hours
Lumens 1400
Dimmable No
Input Voltage 120V, 60Hz
Input Wattage 16
Battery Included No
Power Cord None - Direct Wire
Linkable No
Power Switch Wall Switch
Power Source Direct Wire
Warranty 6-Year Limited Warranty
Fixture Dimensions (inches) 10.4 x 7.8 x 4.31
Fixture Weight (lbs) 1.2
Write Your Own Review
You're reviewing:180-Degree 2-Head 1400 Lumen LED Motion-Activated Flood Light with Timer - Bronze
Your Rating
Customer Questions
Is there a way to disable the motion sensor, so that the light is always on?
There is no way to permanantly disable the motion sensor. You can put the fixture into manual override which allows you to control the fixture via the wall switch. But this resets the following day once the fixture detects sunlight. We recommend a switch-controlled fixture or a fixture with an area light.
The fixture I installed only had a white and black wire and the plug only had 2 white and 2 black contacts. Does this fixture have internal grounding now? The instructions sent with my fixture don't show any grounding wire.
The entire unit is plastic, and there are no outer metal parts to become energized. As such, there is no need for a ground wire.  Connect the black, and white wires from the outlet box to the connector.
Bought 4 of these. Supposed to be satin aged bronze. Box says bronze. Box shows a bronze picture on a black background. All 4 of these lights are black. The receipt even says BLK. What has happened here?
Our satin ages bronze finish is very dark and looks nearly black.
How can I manually turn off manual override so the motion detector is reactivated?
The fixture will either reset the following day when light is detected or you can toggle the wall switch in the same sequence that initiates manual override to remove it.
Did you find what you were looking for?

CA Residents:   Prop 65 Warning(s)