12-in Rechargeable Integrated LED Light Bar - White
See product page: 12-in Rechargeable Integrated LED Light Bar - White (RE1122-WHG-12LF0)
Can I use my iPad charger to charge the light?
As long as it is a compatible micro USB charger, yes.
Can this be used as a plant grow light?
We do not recommend this for a grow light. Please check out UC1272-WHG-24LF0.
Where is the wave mode?
If the fixture is in auto mode, the sensor will pick up motion and activate the light. The sensor is the round piece on the fixture.
What is the size of the screws?
These are #4-40, flat head ½” long.
Would it be ok to put it in the garage?
This fixture is recommended for indoor use. It really depends on how cold/hot the interior of your garage gets. Extreme cold or heat may affect the fixture and its operation.
It comes with a micro USB cord. What 120V adapter can be used to charge the fixture. Is the recharging done in place or can the fixture be easily removed to charge it and then reinstall?
This fixture charges with the micro USB cord that can be plugged into a compatible wall adapter. The fixture includes velcro command strips for easy removal for charging.
Can these lights be mounted vertically (on back of a door) and still work?
Yes. This is not direct wired so you can install it just about anywhere. You may get a lot of triggers if in auto mode on the back of a door though.
How long does it work on a full charge?
Battery life at full charge is 3.6 hours. Running time at full charge is 2.7 months at 8 activations per day.
Does the red charging light turn green when fully charged?
Yes. The light will turn green when the fixture is fully charged.
Can the rechargeable battery be replaced when it will no longer hold a charge?
The battery cannot be replaced. Once the life of the battery is depleted, it can be used as a plug-in fixture.
How long to fully charge the battery?
Charging time is 4.5 hours.
It says 2 modes: wave mode and walk-by mode. Walk by mode is too sensitive for me. How do we do only wave mode?
For walk-by mode, mount the fixture with the motion sensor facing away from the wall. For wave mode, mount the fixture with the motion sensor facing toward the wall.
The description says there is walk-by mode or wave mode. How do you change between the two settings? I see the sensor, but there is nothing that states how to make it either "walk-by" or "wave" mode.
For walk-by activation, mount with the sensor facing away from the wall. For wave activation, mount with the sensor facing toward the wall.
The light is not to be plugged in after fully charged, but the light can also be plugged in for continuous use? What's the difference? If it's plugged in continuously, won't it still be plugged in past the fully charged status?
Once the battery is depleted and can no longer be charged, this can be used as a plug-in fixture.
Does it matter if its on auto, on off to recharge it?
It does not matter, but we recommend having the fixture on off when recharging.
Do I need to register my product in order to use warranty?
We are happy you chose our product, thank you. As with anything that has a great warranty, keep a copy of your original purchase receipt as originals fade and staple it to your instruction sheets/package insert containing the Warranty reference and file away. This documentation is required in case you have a warranty claim in the future. There is no online registration.
The 3M Command strips are no longer sticky. Can I get the name of the particular strip type so I can buy replacements?
(4) 3M Small PHS. I recommend Velcro 3M Command strips.
What USB wall chargers can be used to charge battery?
This fixture charges with a micro USB cord.
Did you find what you were looking for?