AC1068-WHG-06LF0: 6-ft LED Flexible and Cuttable Plug-in Tape Light - RGB, Warm White
See product page: 6-ft LED Flexible and Cuttable Plug-in RGB and Warm White Tape Light (AC1068-WHG-06LF0)
Do you sell longer blank cords to connect around windows and stoves? I have areas that I don’t want lighted.
We are so sorry to disappoint you, but the only accessories available for this kit is what is included in the kit. We do not have any longer connecting cords.
Do you make them 36 feet that are color? I am trying to go around the kitchen using only one line.
Our longest tape light is 24 feet. Also, you cannot connect multiple kits together on one power source.
My self-adhesive tape light with remote stopped working after 4 months. What can I do to fix it?
Have you tried replacing the battery in the remote? And is the receiver/IR controller still visible? This is a line of sight remote so the IR controller/receiver needs to be visible to receive the signal from the remote. If receiver is visible and batteries were replaced, please reach out to customer service at 1-800-291-8838 for warranty replacement. We are available Monday through Friday 8:30 am to 5:00 pm CST.
Does this come with “ L” brackets to deal with 90-degree turns?
This kit does not include "L" brackets. Only corner and block connectors.
Do you have multiport drivers?
The only parts/accessories we have for our tape light kits are what comes included within the kit.
Is there an instruction sheet for running the remote control? It's currently only white lights - I can turn it on/off with remote but can't change the light color.
The buttons located on the black background at the top of the remote control, adjust the intensity and multi-color variations of the color LED’s output. WHITE LED’S Press the “ON” or “OFF” button to turn the white LED’s on, or off. The buttons located on the white background control the brightness and intensity of white LED light output. To dim, or brighten your white LED’s, hold down the dimming, or brighten buttons until reaching the desired light output. Press the 25%, 50%, 75%, or 100% buttons to immediately adjust the white LED’s to these varying levels of brightness. The buttons at the bottom of the remote control, apply festive, and changing light by cycling through color with varying degrees of fades and jumping light changes. Use the “ON” or “OFF” buttons in this section to turn on the color LED’s. To dim, or brighten your color LED’s, press, and hold down the dimming or brighten buttons until reaching the desired light output. Pressing any of the other color buttons will switch the tape light to the color of the button pressed.
Did you find what you were looking for?