4-Pack 9-in LED CCT Selectable Under Cabinet Linking Plug-in Light Bar Set - White

Model
UC1306-WH1-09LFC
Rating:
93 % of 100

This 4-pack set of white LED CCT selectable under cabinet lights make cooking and entertaining in the kitchen easier and more enjoyable. To turn the lights on and off or dim them, just wave your hand underneath the sensor. You can also select your desired white light color temperature from 2700K to 6500K by clicking the button on the sensor. Mount these lights using either the included Command Strips from 3M or with the steel mounting clips and screws. This light kit is a convenient, energy-efficient, and durable solution for your lighting needs.

Specification
Related Model UC1306-WH1-09LFC-G, 3757185
Fixture Material Aluminum
Fixture Color White
Glass/Lens Type Frosted
Mounting Screw Mount or Command™ Strips from 3M
Safety Rated Damp Location
Safety Listing ETL
Light Included Yes
Light Source LED
LED Qty 70
Color Temperature 5 CCT Selectable 2700K/3000K/4000K/5000K/6500K
Color Temperature Warm White/Soft White/Cool White/Daylight/Cool Daylight
Color-Changing Temperature Yes
Color Rendering Index (CRI) 80
Rated LED Life 50,000 hours
Lumens 250
Dimmable Yes
Dimming Type Touchless On/Off/Full Dim
Input Voltage 120V, 60Hz
Input Wattage 15
Battery Included No
Specification
Command Strips® from 3M Yes
3M Command Strips Model Small foam strips (XA006726724)
Number of 3M Command Strips 9
Power Cord 5-ft power supply driver with plug
Linkable Yes
Connector Cord (4) 4-inch cords, (2) 12-inch cords, (3) 30-inch cords
Power Switch Wave On/Off/Dimming; 5CCT Button
Power Source Plug In
Warranty 6-Year Limited Warranty
Fixture Size 9 in
Fixture Dimensions (inches) 9 x 1.73 x 0.31
Fixture Weight (lbs) 1
Number in Pack 4-Pack
Includes Remote No
Write Your Own Review
You're reviewing:4-Pack 9-in LED CCT Selectable Under Cabinet Linking Plug-in Light Bar Set - White
Your Rating
Customer Questions
Are longer linking cords available?
We are so sorry to disappoint you, but longer linking cords are not available for this fixture.
Can I link more than 4? Is there a limit? I bought two 4 packs and was wondering if I could link all 8 to one hand sensor and power cord?
LED kit cannot be added onto as the plug-in driver is designed to work with a maximum of 4 bars.
I would like to go 2 directions from my power source. Is there a splitter for this application?
We are sorry to disappoint you, but the only accessories we have for this product are what comes included.
Is there a coupler to connect the linking cords together?
No. We do have longer cords available. Please reach out to customer service at 1-800-291-8838. We are available Monday through Friday 8:30 am to 5:00 pm CST.
I only need 2 lights, but I need them 5 feet apart. Is there a way to allow them to be linked 5 feet apart?
Please contact customer service at 1-800-291-8838 for assistance in obtaining longer linking cords.
Is there a way to keep a desired temperature? Every time I turn my lights off and back on, it defaults to 2700K. I would like it to stay at 4000K consistently.
Unfortunately, no. The fixture does not have a memory to hold settings. It will default when turned off at the switch.
Are there longer lamp options other then 9”?
These lights are only available in 9 inch.
Can I link an 18” light bar with a 9” light bar?
There is no 18-inch bar included in this kit. 
I purchased a four pack. I would like to use three in one location and the forth in another. Can I purchase a second power cord and sensor switch?
Unfortunately the power supply is not available separately for this fixture.
I purchased the UC1306/12” kit. When I turn it on, by way of a light switch, it goes to maximum output, with coolest light setting.I keep having to adjust its brightness and output setting. Is there any way for it to “store” the settings without having to adjust it each time?
Unfortunately, no. If turned off at the switch, the lights will default to factory.
Can these be purchased as a single pack? I need 5 and don't really want to by 8.
This only comes in a set of four. We have another product that may work. https://goodearthlighting.com/3-pack-led-flat-linking-plug-in-light-bar-set.html
Can these be used without the motion sensor?
No. The wave sensor needs to be somewhere within the ciruit.
Did you find what you were looking for?

CA Residents:   Prop 65 Warning(s)