240-Degree 3-Head 3300 Lumen Dual Detection LED Motion-Activated Flood Light with Timer - Bronze

This Good Earth Lighting LED flood light provides safety and security for the home by illuminating dark exterior areas, such as backyards and driveways. This has a 2N1 adjustment control allowing for two levels of light with high or low beam light and automatic nighttime lighting with motion detection, offering in 3 color tunable white selection. The adjustable timer and range controls allows for maximum customization with an option for manual override, disabling automatic nighttime lighting features to operate from a light switch inside the home. The Set To Go feature has preset out of the box, no testing required, with detection range of 50 feet with 3-minute timer in 5000K daylight. The IP65 rating makes it ideal for outdoor wet locations; the light is cold weather rated with a minimum cold start temperature of negative 20°F. This light is safety tested and has a 10-year limited warranty. This light is an upgrade of SE1095.

Specification
Related Model SE1293-BP2-02LF0-G, 3761805
Fixture Material Die-cast Aluminum
Fixture Color Satin Aged Bronze
Glass/Lens Type Diamond Pattern
Mounting Wall/Eave/Surface/Recessed Mount
Motion Detection Range 240 degrees up to 100 ft and 360 degrees below
Two Level Lighting Yes
Two Detection Zone Yes
Light Coverage Spread: 65 ft; Distance: 68.9 ft
Safety Rated Wet Location
Safety Listing ETL
Energy Star No
Light Included Yes
Light Source LED
LED Qty 80
Color Temperature 3000K/4000K/5000K Selectable
Color-Changing Temperature Yes
Color Rendering Index (CRI) 80
Rated LED Life 50,000 hours
Specification
Lumens 3300
Dimmable No
Input Voltage 120V, 60Hz
Input Wattage 40
Battery Included No
Power Cord None - Direct Wire
Linkable No
Power Switch Wall Switch
Power Source Direct Wire
Warranty 10-Year Limited Warranty
Fixture Dimensions (inches) 12.41 x 5.67 x 7.91
Fixture Weight (lbs) 1.87
Write Your Own Review
You're reviewing:240-Degree 3-Head 3300 Lumen Dual Detection LED Motion-Activated Flood Light with Timer - Bronze
Your Rating
Customer Questions
Can this light just go motion only at night?
Yes. This fixture has a factory preset that keeps the area light on at a low beam from dusk to dawn. The fixture will then jump to high beam once triggered with motion. To turn this off, you will need to reset the fixture. Please try resetting your fixture by following the instructions below. Please make sure the fixture is put into test mode prior to cutting power to the fixture. The fixture then needs to come on twice in test. Once when power is turned back on and a second time with motion. After this is successfully completed, you are reset, you can put it your desired settings. Do NOT leave the fixture in test. Please do NOT adjust the fixture after the reset, or toggle the wall switch. Give it at least 24 hours to reset and calibrate. If you have any issues with the fixture after or during the reset, please let me know right away. Please note the fixture should not operate out of test mode in daylight hours due to the built in dusk to dawn sensor. Please note the third or fourth dial is your low beam area light. That will keep the fixture on from dusk to dawn, if you want this to operate strictly with motion, turn that setting off. If the fixture does not trigger with motion in test. Still take the fixture out of test, put in your desired settings, and see how it operates tonight. We also recommend turning the area light dial on and off a couple of times before you set it. Security Light Installation Part 11: How to Troubleshoot and Reset Your PIR
I just purchased and installed an outdoor motion activated 3 way spot light, model # SE1293-BP2-02LF0-G OR SE1293-WH3-02LF0-G. I have the dusk to dawn setting off. Light is at 5000 for 5 minutes set at max distance. It worked as it should for about a week. It shuts off when the sun comes up and goes on when the sun goes down but it does not turn off all night long. It appears to be stuck on and not working in the motion activated mode. Dusk to dawn is off. I have changed the power, the time and the distance. Moved the dusk to dawn on and then back off to see if I could get it to work. We have not turned it on manually using the light switch. It just will not turn off and go into motion activation. Is there something that we can do?
This fixture has a factory preset which  has the area light feature on. To turn that off, please try resetting your fixture by following the instructions below. Please make sure the fixture is put into test mode prior to cutting power to the fixture. The fixture then needs to come on twice in test. Once when power is turned back on and a second time with motion. After this is successfully completed, you are reset, you can put it your desired settings. Do NOT leave the fixture in test. Please do NOT adjust the fixture after the reset, or toggle the wall switch. Give it at least 24 hours to reset and calibrate. If you have any issues with the fixture after or during the reset, please let me know right away.Please note the fixture should not operate out of test mode in daylight hours due to the built in dusk to dawn sensor. Please note the third or fourth dial is your low beam area light. That will keep the fixture on from dusk to dawn, if you want this to operate strictly with motion, turn that setting off. If the fixture does not trigger with motion in test. Still take the fixture out of test, put in your desired settings, and see how it operates tonight. For SE1292 and SE1293 models, if you want the low beam area light off, change the setting to 3 hrs prior to putting in test mode. Once you reset and take the fixture out of test, change the area light setting to off. While power is on change the area light settings to 3 hours, then put the fixtures into test mode.Turn power off for 2-3 minutes.Turn power on.Lights should come on for 15-20 seconds then shut off.After the lights shut off, try triggering in test. If they do not trigger that is fine.Take the fixtures out of test, put in your desired settings.Turn the area light off.
What side of the 2-way connect do I want to use?
It does not matter what row you plug your wires into, but we recommend that you put ALL the wires into the same row. More importantly, you need to make sure that the supply wires from the house match (in color) with the wires coming from the fixture.
Did you find what you were looking for?