Hyper Bright LED Flood Light - White

Light up your driveway like a ballpark™ with Good Earth Lighting's Hyper Bright LED Flood Light. The Hyper Bright security light is waterproof and dustproof and can handle temperatures as low as -20°F. Made with strong aluminum and a shatter-resistant lens, this flood light provides powerful and efficient lighting. Use the preset settings or adjust the fixture to your lighting preferences. The user-friendly controls are all in one spot under the PIR (passive infrared) sensor. Choose the right brightness and color temperature to suit your needs, whether for cozy ambience or enhancing security. The security light can detect motion far away, perfect for long driveways or expansive yards. Reduces dark corners with wide light coverage. Enhance your home security and deter any potential intruders with the Hyper Bright.

Related Model SE1356-WH3-02LF4-F, SE1356-WH3-02LF4-G
Fixture Material Aluminum
Fixture Color White
Glass/Lens Type Diamond Pattern
Mounting Wall/Eave Mount
Motion Detection Range 180 degrees up to 100 ft
Two Level Lighting No
Two Detection Zone No
Light Coverage 70 feet outward, 86 feet wide
Safety Rated Wet Location
Safety Listing ETL
Light Included Yes
Light Source LED
LED Qty 112
Color Temperature 3000K/4000K/5000K Selectable
Color-Changing Temperature Yes
Color Rendering Index (CRI) 80+
Rated LED Life 50,000 hours
Lumens 4000/1500
Dimmable Yes
Dimming Type On Fixture - High/Low/Off
Input Voltage 120V, 60Hz
Input Wattage 50
Battery Included No
Power Cord None - Direct Wire
Linkable No
Power Switch Wall Switch
Power Source Direct Wire
Warranty 10-Year Limited Warranty
Fixture Size 9.375 in
Fixture Dimensions (inches) 9.375 x 8.03 x 8.27
Fixture Weight (lbs) 2
Write Your Own Review
You're reviewing:Hyper Bright LED Flood Light - White
Your Rating
Customer Questions
Can I install the Hyper Bright LED Flood light 6.5 ft above the floor? What are the limitations and risks at this height?
It is not recommended to install this fixture below 8ft. Recommended height is 8-10 ft. Doing so can result in false triggers.
Is there a process to "reset' the light - even though the motion setting is at 10ft, it can pickup movement at 50ft
You can just readjust the range/distance on the dial on the back of the PIR sensor.
Where do the translucent plugs go on the Good Earth hyper bright LED flood light Model: SE1356-WH3-02LF4-F
The transluscent plugs will go over the screws on the mounting plate.
Can a red wire be installed on this light to run additional lighting
This fixture cannot be wired to an another fixture.
Can the light operate on switch only and bypass the motion sensor?
Yes. You can put the fixture on switch control mode on the timer knob on the back of the fixture to control VIA your light switch.
How do I activate. The dusk to dawn setting on my light. Where do I set the dials.
This fixture has two modes: Security and switch control. If you want the fixture to come on as long as the switch is on use switch control mode. If you want the fixture to come on with motion only, you would set a time on the minutes dial and range on the distance dial. Please reach out to customer service at 1-800-291-8838 for assistance. We are available Monday through Friday 8:30 am to 5:00 pm CDT. Or contact us VIA our website.
How do I get the light to stay on continuously at night?
You can either temporarily put the fixture into manual override by toggling your wall switch. Or you can switch the minutes dial located on the back of the fixture to switch control. That will allow you to turn the light on VIA your wall switch.
Where can I buy the light bulbs needed.
This is an LED fixture. It does not contain/need light bulbs.
Can I use a dimmer?
You cannot install this fixture on a dimming circuit.
Did you find what you were looking for?

CA Residents:   Prop 65 Warning(s)