Contractor Series II 18-in LED Direct Wire Under Cabinet Light - Gloss White

This LED direct wire under cabinet light is a contractor-friendly design, making wiring easy with a bigger wiring compartment. It is made of metal construction with a frosted diffuser and is linkable with the included 18-in linking cord. It has a Bright White color temperature with a bright light output perfect for cooking or task lighting. Dimmable down to 15% brightness using most Triac wall dimmers to your preference. Count on long-life LED lights that have a lamp life of 50,000 hours.

Specification
Related Model UC1248-WH1-18LF0-G,1238194
Fixture Material Stamped Metal Housing
Fixture Color Gloss White
Glass/Lens Type Frosted
Mounting Screw Mount
Safety Rated Damp Location
Safety Listing ETL
Energy Star Yes
Light Included Yes
Light Source LED
LED Qty 42
Color Temperature 3000K
Color-Changing Temperature No
Rated LED Life 50,000 hours
Lumens 720
Dimmable Yes
Dimming Type Triac Wall Dimmer
Input Voltage 120V, 60Hz
Input Wattage 9.43
Specification
Battery Included No
Command Strips® from 3M No
Power Cord None - Direct Wire
Linkable Yes
Connector Cord (1) 18-inch 3-conductor cord
Power Switch On/Off Rocker Switch
Power Source Direct Wire
Warranty 6-Year Limited Warranty
Fixture Size 18 in
Fixture Dimensions (inches) 18 x 3.5 x 1.13
Fixture Weight (lbs) 1.6
Includes Remote No
Write Your Own Review
You're reviewing:Contractor Series II 18-in LED Direct Wire Under Cabinet Light - Gloss White
Your Rating
Customer Questions
How do you control bright, soft, or warm setting?
This fixture has a 3000K color temperature, bright white. This fixture is dimmable by specific forward phase electronic (triac) dimmers. Dimmers tested to be compatible with this fixture are Lutron Skylark SCL-153P, Lutron Diva DVCL-153P, Lutron Maestro MACL-153M, Lutron Toggler TGCL-153P, Lutron Lumea LECL-153P, Lutron Caseta PD-6WCL, and Eaton Halo SAL06P. Not recommended for use with motion or light sensors, timers, or any other external controls.
I don’t understand what this “linkable” function is. I have power running to both fixtures, and the linking cord installed, but cannot determine exactly what is supposed to be happening. Both fixtures operate independent of one another in this configuration.
If you are only able to direct wire one fixture, you can use the included linking cord to link an additional fixture without having to direct wire. 
How do you mount this light?
You can view our UC1248 Pro Series Under Cabinet Direct Wire Bar Installation video created by one of our engineers on our Good Earth Lighting YouTube channel.
To minimize the size of holes through cabinets, is the plug end removable or are replacement plug ends available? And will a single dimmer switch control/dim all linked lights?
The plug end is not removable and replacement plug ends are not available. If you have your fixtures linked to a fixture controlled by a dimmer, the dimmer will control all lights as long as the toggle switch is on.
Can I use an existing plug box to run a wire to wire up the light?
We cannot recommend installing in any way other than listed in our instructions.
Recommended dimmer?
THIS FIXTURE IS DIMMABLE BY SPECIFIC FORWARD PHASE ELECTRONIC (TRIAC) DIMMERS: Dimmers tested to be compatible with this fixture are Lutron Skylark SCL-153P, Lutron Diva DVCL-153P, Lutron Maestro MACL-153M, Lutron Toggler TGCL-153P, Lutron Lumea LECL-153P, Lutron Caseta PD-6WCL, Eaton Halo SAL06P. Not recommended for use with motion or light sensors, timers, or any other external controls.
Did you find what you were looking for?

CA Residents:   Prop 65 Warning(s)